By definition, a jack stand is a stand that is used to support a vehicle that has been raised by a jack.
To use it, you need to slide it into a safe and secure spot of the vehicle’s frame. While raising both wheels of either side of the vehicle, you need to place the jack stands near each wheel.
Its main function is to provide support to the raised up automobile, while the purpose of lifting is done by the jack.
Check out our reviews on the 7 best jack stands of 2020 and select one for yourself if you need them frequently.
Apextreme Steel Jack Stands
This jack stand has a capacity of 6 tons and its height ranges from 15.55″ to 23.81″. It is constructed with durable and strong steel that is rust-proof and provides a strong, as well as a safe support to an automobile.
It has a self-locking ratchet bar, which means that it does not need to be locked manually and does not need a locking key. It automatically locks when the handle is put down.
It can be used at home, or any other garage or shop. It is portable, and can easily support dirt bikes or motorcycles.
- Capacity 6 ton.
- Height- 15.55″ to 23.81″.
- Steel frame.
- Self-locking ratchet.
- Can be used at home or any other shop.
- Supports dirt bikes and motorcycles.
Overall Ratings– 3.9/5 stars.
OTC 1733A Ratcheting Jack Stand
This is a strong and sturdy jack stand with a height range of 12-1/2 inches to 18-1/2 inches. It has a self locking ratchet handle, which means no locking key is needed and it automatically locks when the handle is turned down.
It has an enamel finish that makes it non-corrosive in nature, which in turn makes it a very durable and long lasting product. It is a tested product and is safe to use.
It also features welded foot pads, which prevent the jack stand from sinking into the ground.
- Sturdy framework.
- Height range of 12-1/2 inches to 18-1/2 inches.
- Self locking ratchet.
- Enamel finish material.
- Tested as safe.
- Welded foot pads.
- Conforms to ANSI PALD load rating standard.
Overall Ratings- 5.0/5 stars.
Torin Big Red Steel Jack Stands
It is a lightweight jack stand that efficiently supports your vehicle, in a safe and strong manner. It has a wide pyramid foot base which increases its overall strength and and gives the maximum possible stability.
It is made of forged steel, and is a very durable product, all thanks to its welded framework! It can easily handle small cars, SUVs, etc. It has an adjustable height that ranges from 15-3/8″ to 23-13/16″. It has a capacity of 6 ton.
It has a saw-tooth design on its multi-position ratchet bar. This allows the user to adjust the stand’s height quickly. It has a saddle surface area for better stability.
- Safe and strong.
- Wide pyramid foot base.
- Gives maximum stability.
- Made of forged steel.
- Welded framework.
- Handles small cars and SUVs.
- Height ranges from 15-3/8″ to 23-13/16″.
- Multi-position ratchet bar has saw tooth design.
- Saddle surface area.
Overall Ratings– 4.7/5 stars.
TONDA Steel Jack Stands
This steel jack stand has a capacity of 2 ton and has a lift range of 10.7-17 inches. It has a self-locking design, which means that there is no need for a locking key to lock the stand. It automatically locks when the handle is put down.
It has an over-sized foot base, which increases the strength and stability of the jack stand under the load. It features foot pads, thus, it can be used on a soft ground as well.
It has a rust-proof coating which increases the durability of the product. It also comes with a warranty of 1 year by the manufacturer.
- Made of steel.
- Capacity 2 ton.
- Lift range is 10.7-17 inches.
- Self-locking design.
- Over sized foot base.
- Also has foot pads.
- Comes with a 1 year warranty.
Overall Ratings– 4.5/5 stars.
Crescent Bear Jack Stands
It is a lightweight jack stand that has a wide foot base which makes it all the more stable and strong than other jack stands.
It is made of high grade forged steel that also features a welded frame for improving the stand’s performance. It has a rust proof coating, and is known to be a very durable product.
It can handle a number of vehicles, starting from small cars to SUVs, and even light duty trucks. It has a saw-tooth design on its multi-position ratchet bar, which ensures fast height adjustments. It has a big saddle surface area.
- Wide foot base.
- Stable support.
- Made of high grade forged steel.
- Has a welded frame.
- Can handle small cars, SUVs, light duty trucks.
- Multi-position ratchet.
- Saw tooth design.
- Large saddle surface area.
Overall Ratings– 3.5 stars.
OTC 1778B Low Profile Jack Stand
This low stand support jack stand has a height range of 19 inch to 29-1/2 inch. It does not sink into sand and has a rounded bottom.
It has a capacity of 12 ton and can handle even heavy duty trucks. Its weight is 3 pounds and it gives a strong support to your vehicle without digging into the ground.
It is easy to use, and can be used at home, in garages, or in any other place where automobiles need to be lifted. It comes with an OTC Lifetime Marathon Warranty.
- Capacity of 12 ton.
- Height range is 19 inch to 29-1/2 inch.
- It does not sink into sand or soft ground.
- Rounded bottom.
- Can handle heavy duty trucks.
- Easy to use.
- Can be used at various spots.
- Comes with OTC Lifetime Marathon Warranty.
Overall Ratings– 5.0/5 stars.
Torin Big Red Aluminum Jack Stands
It is a lightweight jack stand that can handle a range of vehicles like small cars, UTVs, jeeps, etc. It has a lift capacity of 3 tons, and a lift range of 10.71″ to 15.63″.
It has a large surface area saddle that gives a better touch/contact with the load that is being supported. It also has a large foot base size which enhances its performance.
It is made of premium quality aluminum and is non-corrosive in nature. It has a removable locking support that makes its use more safe and efficient. It comes with a 1 year warranty of the manufacturer.
- Can handle vehicles like small cars, UTVs, jeeps, etc.
- Capacity of 3 tons.
- Lift range of 10.71″ to 15.63″.
- Large saddle.
- Large foot base size.
- Made of aluminum.
- Comes with 1 year warranty.
Overall Ratings– 4.7/5 stars.
Frequently Asked Questions
Are jack stands necessary?
You need a jack for lifting a vehicle, which may be for various purposes, from changing a tire, to performing any repair work. But the jack does not provide any support. It just simply lifts the vehicle. Hence, a jack stand is required to make the process of lifting a vehicle safer, since it provides support to the same.
Where do you place a jack stand?
A jack stand needs to be placed near the jack. Select a secure area beneath the vehicle lifted to place the jack stand for maximum support.
What size jack stands do I need?
A reliable and standard way of selecting the size of the jack stand that you should buy or have is that it should always the lifting capacity that is double the weight of your vehicle.
Can you use just two jackstands?
The number of jack stands that you need to use depends on the kind of work you are doing. If you just need to lift one wheel, then one jack stand would do. And if you need to lift 2 wheels, then 2 jack stands at either end would be required. In order to lift the entire car, you need 4 jack stands.
Can you leave a car jacked up?
The risk that is carried while leaving a car jacked up throughout the night is the improper placement of the jack which would result in the jack falling on the ground.
Buying a jack stand should be a one-time task. It is not something that you need to buy every year. So, selecting the most suitable jack stand is a very important, as well as a tricky job.
Before you buy a jack stand, just consider the vehicle that you will be working on, or the kinds that you might be needed to work on. These come in different heights, and the height you select should solely depend on your vehicle. Different cars need jack stands of varying heights and to it is important to select the right one for your vehicle.
Also, don’t forget to check the build quality of the jack stand, since these come in a number of variants. Select a stand has a high lifting capacity, and does not fail to have basic features like non-corrosiveness, non-rust, etc.
Always go for a welded framework, so that your product is durable and provides maximum strength.
We know selecting a jack stand can be a tricky job, and we hope our reviews helped you in picking out one for yourself. So, go check Amazon, and buy that jack stand right away!
Thanks for reading this article! Please leave your comments below.
Check out our article on the Top 9 Electric Fireplaces of 2020